Which is the Best Cold Air Intake For Ford F150 3.5 EcoBoost?

Best Cold Air Intake For Ford F150 3.5 EcoBoost

If you’re looking for a cold air intake for your Ford F150, there are a few important things you should know. Here, I’ll compare the various brands and their claims. Hopefully, you’ll be able to decide which is best for your car. But, first, let’s look at what cold air intake for F150 3.5 EcoBoost is best.

Table of Contents


The K&N cold air intake for Ford F-150 3.5 Ecoboost is designed to add horsepower and torque to your truck, while still preserving the integrity of your vehicle’s engine. This kit is easy to install and provides the horsepower and torque you need without sacrificing your engine’s safety. You can find K&N dealers and cold air intake kits near you to purchase a K&N cold air intake for Ford F150.

You must remove the factory air filter assembly to install the K&N intake. Then, remove the Y plate from the Y-pipe. You must rotate it counterclockwise to remove the blue O-ring from the sensor. Then, install the grommet into the K&N tube. Once the grommet is installed, reconnect the sensor to the K&N tube.


The aFe cold air intake for FordF150 3.5 Ecoboost is a great way to increase performance, and is designed to be relatively easy to install. The intake uses a high-quality plastic or roto-molded intake tube to maximize flow and performance. The heat shield snaps onto the lower half of the factory air box, and the intake system uses the same mounting locations. The aFe intake system includes an aFe Pro DRY S air filter with a five-3/4″ flange opening and inverted top, providing more airflow than stock.

The aFe Sealed Intake is designed for the Ford F-150 and adds performance and style to the engine bay. This intake is extremely low-maintenance, but it does require some tuning. It’s not CARB exempt, so it is not legal for street use in California. However, it’s worth the price difference. AFe has an extensive range of performance parts, so you can’t go wrong.


CVF cold air intake for Ford F150 models is a good choice for anyone looking to improve the power and efficiency of their truck. The company offers a couple different options, with the dual-filter system giving the most airflow increase, and the aFe intake system featuring a dual-filter design and a higher air flow rate than the stock intake. These intake systems can be installed in either a 3.5 or a 2.7-liter EcoBoost model, and they will also reduce the pressure drop and heat from your engine.

The K&N 57-2592 cold air intake replaces the factory air filter and housing, reducing air restriction and smoothing out the flow. The intake allows a larger volume of air than the stock air filter assembly, which in turn feeds more fuel to the engine and boosts horsepower and torque. This K&N intake system is compatible with the 2015 to 2020 Ford F150 3.5 Ecoboost and is designed to provide over 23 horsepower.


S&B cold air intakes are designed to minimize restriction and maximize airflow. They feature a one-piece air box that keeps out dirt and engine heat while still providing a clean, factory look. A silicone rubber lid seals tightly around the air element, ensuring a perfect fit. The resulting cold air intake will increase horsepower and torque without compromising looks or performance.

The S&B cold air intake kit features a 100% complete installation that comes with all hardware and components needed for installation. Its air filter has an oiled cotton base and silicone tops to prevent rust and corrosion. The S&B cold air intake also features a larger forward air scoop to increase airflow volume. It is compatible with all EcoBoost engines, making it a great choice for owners of mid-sized trucks looking to increase horsepower and torque.

Magnum Force

The aFe Magnum Force cold air intake for Ford F-150 3.5 Ecoboost is designed to increase your truck’s airflow by up to 44%, which is necessary to make the most of the engine’s power potential. The aFe Magnum Force Stage 2 ST Cold Air Intake Kit replaces the stock intake and outflows it by 44%, allowing you to maximize the performance of your truck. Its aggressive open air element filter design and dual air filters are built around aFe Pro Dry S conical filters, which require no oil and provide maximum filtration. The aFe Magnum Force Stage 2 ST Cold Air Intake Kit also features a heat shield assembly and upper seals, ensuring maximum performance and efficiency.

AFe’s cold air intake for Ford F150 3.5-liter Ecoboost is designed to fit into your truck’s factory air filter system. The aFe intake system is made of lightweight, durable, and powder-coated aluminum. It’s compatible with both factory and aFe intake systems, and requires no modifications to your truck’s engine. It also does not require a CARB EO# or any modification to the vehicle.


If you’re considering a cold air intake for your Ford F150, you should know that the JLT has been designed to fit a variety of different vehicles. These include Ford trucks, Mustangs, and GM cars. These intakes come with all the necessary components to install easily and effectively. And since they use reusable S&B filters, you can install them yourself in as little as an hour.

Recommended Articles

Leave a Reply

Your email address will not be published. Required fields are marked *